What should be noted when changing the oil of the baler?
2023/04/14 click:18971

The use of corn stover baler is not as simple as expected, and there are many factors to consider during the use process. For example, the choice of oil has a profound impact on the entire equipment, and the quality of the oil is directly related to whether the packaging effect and service life of the corn straw baler can achieve the expected goals.

Principle 1: The oil used for corn straw balers must not be mixed with diesel or gear oil. Adding diesel or gear oil to engine oil can damage the additives in the oil, causing it to quickly deteriorate and become ineffective, exacerbating the wear of friction components.

Principle 2: Do not use engine oil instead of gear oil. After replacing gear oil with engine oil, the transmission system gears are less prone to oil film, which will increase the wear of secondary components.

Principle 3: Do not mix old engine oil with new engine oil. After mixing new and old engine oil, it will accelerate the oxidation and deterioration of the new engine oil, thereby reducing the effectiveness and duration of its use.

Principle 4: Do not use gasoline engine oil instead of diesel engine oil, otherwise the engine oil is prone to oxidation and deterioration, damaging the corrosion-resistant diesel engine bearings.

Principle 5: The lubricating oil of the corn straw baler should not be mixed with oil or diesel. Mixing with oil or diesel can easily lose the lubricating grease and reduce its effectiveness.

Principle 6: Do not use engine oil instead of brake oil. Replacing brake oil with engine oil can cause the rubber components of the brake system to expand, leading to brake failure.

Principle 7: Do not use hydraulic oil instead of engine oil. When hydraulic oil is used as engine oil, it will produce a paint film during combustion, which is difficult to remove and will increase wear after replacement.

Principle 8: When replacing corn stover packaging oil, it should be done correctly and appropriately to ensure effective use of the oil. If the technical conditions for oil inspection and identification permit, try to replace the oil according to its quality as much as possible to reduce the cost of the oil. To extend the service life of engine oil, old engine oil and lubrication system should be cleaned when changing engine oil. When adding new oil, be careful not to mix impurities and water with existing ones, and replace the filter element when changing the oil.


Product Center
Related news
Straw baler Baler
Looking forward to your call. Customer Service Hotline:400 - 101 - 2499
Liaoning Haikuo Machinery and Equipment Manufacturing Co., Ltd
打捆机
No.15 Beixinhua Road, Wensheng District, Liaoyang City, Liaoning Province
秸秆打捆机

Tel:400 - 101 - 2499

Friendship links:
品牌强国 中宏网品牌档案
Copyright © 2015 辽ICP备19013231号-1 Copyright © Liaoning Haikuo Machinery Equipment Manufacturing Co., Ltd.
Shenyang website construction:Seqill Media provides full-process online planning