After the straw baler is operated, the straw cannot be picked up. The main reason for this phenomenon may be that the selector setting of the straw crushing and bundling machine is incorrect (too high from the ground); Driving too fast; Broken or worn spring teeth;
Processing: Adjust the height of the picker from the ground; Reduce driving speed; Replace the spring teeth. Firstly, uneven straw or uneven working speed of the feeding fork. Adjust the operating speed and power output speed of the automatic baler to ensure even feeding volume. Secondly, the fork feed is insufficient and the piston is compressed. The slow bundling frequency results in insufficient pressure on the bundling machine, and the output shaft speed of the tractor needs to be increased to at least 540r/min.
The straw pulverizer and baler is running normally, and most of the bales are regular round bales. If there are irregular bundling or inconsistent bundling lengths, the baler must malfunction and shut down.
Reasons and solutions for irregular bundling of straw crushing and bundling machines: Irregular bundling shapes indicate excessive feed volume, therefore the operating speed should be reduced.
Firstly, the clutch claws of the binding mechanism cannot rotate well, so the pins that separate the claws should be cleaned and lubricated.
Secondly, polish and measure the surface engraving of the wheel axle roller sleeve, replace the roller sleeve, check the engraving on the clutch lever, and whether the system teeth mesh with the teeth on the roller sleeve.
Subsequently, due to social contact, the clutch lever spring may become loose or damaged, and the spring should be inspected.
The straw crushing and bundling machine is mainly composed of a bundling machine and a coating machine connected by a simple bracket. With the continuous improvement of agricultural technology in China, it has emerged. This independent machine can complete the tasks of picking, bundling, and wrapping. All of these operations are automatically completed without interruption, greatly reducing labor and saving a lot of work time.