What are the solutions to the malfunction of straw balers?
2023/03/03 click:6298

Many users may find that the straw baler is experiencing some minor issues while working. Although it will not cause too serious an impact, it will still affect the operation of the straw baler. Therefore, we can master some methods to solve minor faults in straw balers and promptly resolve them to ensure that the equipment always operates in the correct way.

The connection between the main unit of the straw baler and the baler; The limit arm should be properly connected. Too loose cannot achieve the limit effect, and the limit arm is prone to grinding the rear tires of the main engine. In addition, if the swing amplitude is too large, it is easy to damage one's own parts. Being too tight will increase the turning angle, so do not pick up the rake when turning on the ground.

Straw baler rope not entering; Firstly, check if the rope is tangled due to quality issues, such as a knot that is too big or a fuzz that is too large. Secondly, check the straw density at the entrance (left side) of the rope. If the density is not high enough, the friction between the rope and the straw will not be strong enough. At this point, there can be more grass on the left side of the baler to increase the friction at the entrance of the rope and promote feeding.

Straw baler

Adjustment of easily scattered bales; When the humidity of straw is high and it is easy to pick up and bundle, the density holes of the straw baler can be reduced. When straw is dry and fragile, and difficult to pick up and feed, the density holes of the straw baler should be increased or the straw should be tied by adjusting the number of turns of the tying rope. If the straw is dry, it will increase the number of turns; If the straw gets wet, it will reduce the number of turns.

Rope adjustment: The length of the rope should be adjusted so that the rope end just touches the blade. Due to the dull blade and continuous cutting of the rope, the blade should be replaced.

Reasons and solutions for protecting screws from twisting; When the straw baler is filled with straw, if the alarm does not sound, the straw will pile up at the entrance. At this point, if you continue walking, it will cause the protective screw to twist.

There are two reasons why the straw baler alarm does not sound; Firstly, the power supply is not properly connected; Secondly, the wires are disconnected; Thirdly, the spring handle is separated from the handle groove. If such a malfunction occurs, the machine should be shut down promptly and adjusted according to technical requirements.

This is some related knowledge about troubleshooting solutions for straw balers. In addition to the information about the baler mentioned above, if you know any other related content, feel free to share it with everyone. Thank you for your continued attention and support.


Product Center
Related news
Straw baler Baler
Looking forward to your call. Customer Service Hotline:400 - 101 - 2499
Liaoning Haikuo Machinery and Equipment Manufacturing Co., Ltd
打捆机
No.15 Beixinhua Road, Wensheng District, Liaoyang City, Liaoning Province
秸秆打捆机

Tel:400 - 101 - 2499

Friendship links:
品牌强国 中宏网品牌档案
Copyright © 2015 辽ICP备19013231号-1 Copyright © Liaoning Haikuo Machinery Equipment Manufacturing Co., Ltd.
Shenyang website construction:Seqill Media provides full-process online planning